Best Battery For Arrma Typhons 3: The Source Of Power

“Darn it, my Arrma Typhon’s battery died yet again!” You’re probably here because you recently uttered these words to yourself.

If you’ve ever doubted the performance of your battery, you’re not alone nor insane. Batteries, although being inanimate objects, have a lifespan. 

This is why choosing your battery properly is a crucial task. This task is by no means an easy task.

This is because there are thousands of articles and posts regarding this which might end up confusing you.

Luckily for you, that is where our guide to the best battery for the Arrma Typhons 3 comes in.

Believe me when I say that this post is the result of many restless nights.

We’ve scoured the Net for days on end to write you this post. So you know you’ve come to the right place and hopefully, we won’t disappoint you.

So without further ado, let’s jump right into it-

Type Of Product

Before we get to the specifics, there are certain things you should know about batteries beforehand. More importantly about the different types of batteries out there.

Normally for RC cars, such as your Typhoon 3, there are two types of batteries available. One is a LiPo battery and the other is the NiMH type battery.

The term “Lithium-Ion Polymer” refers to a type of battery. Rather than using a liquid electrolyte, it uses a polymer-based electrolyte.

LiPo batteries are significantly lighter and are available in a wider range of sizes. If you’re attempting to save weight in your RC car, this adaptability can help. They’re constructed like sprinters for brief bursts of intense energy.

Lithium-ion batteries have the largest capacity, this means they can store the largest quantity of charge.

Now, don’t get too excited; NiMH batteries have their own set of benefits. For starters, when NiMH batteries are ruptured, they do not cause fireworks.

NiMHs are designed to last longer and have a longer lifespan. LiPo batteries, on the other hand, have a lifespan of roughly 250 cycles.

Comparison Table

AWANFI LiPo 3S Battery 

The first name on our list is the AWANFI 60C LiPo Battery. After hours of research, we’ve concluded that this is the best in the market.

So why is it the best option for your Arrma Typhon 3?

Well for starters, this 3S battery pack isn’t just for Arrma Typhons. It is compatible with a wide array of models such as Duratrax, Helion, Hot Bodies, Kyosho, Pro Boat, Schumacher, Traxxas, Vaterra, etc.

The AWANFI has 3 battery cells connected in series, which give you a combined voltage of 11.1V. It also boasts a pretty decent mAh rating of 5000mAh and a discharge rating of 60C.

Although these aren’t the highest specs on the list, there’s a reason this took the top spot.

And that is due to the sheer dependability of the battery’s performance. In contrast to other batteries, the AWANFI is more recyclable, has IC chip overvoltage protection, and 280+ cycle life.

This makes the AWANFI a great choice for short bursts of high power. However, it is important to note that it cannot hold it for too long.

That being said overall, the AWANFI comes with 2 batteries and extra velcro straps and offers great value for money.

Room For Improvement

One of the main issues for the AWANFI is that it’s not a marathon runner. If you want a consistent power provider you should use Ovonic’s 5200mAh LiPo battery.

Ovonic’s 5200mAh 3S LiPo Battery with EC5 Connector

Coming in at second on the list is a well-known brand. Throughout the years this brand has produced some excellent RC batteries. This is none other than the Ovonic’s 5200 mAH, 50C 3S LiPo battery.

So why is Ovonic only second to the AWANFI? Well, believe me, we had a hard time choosing between the two, as they are pretty similar.

But in the end, we had to choose the Ovonic for the second place as the AWANFI got the edge over its wide range of adaptability and a higher discharge rating of 60C, compared to the Ovonic’s 50C.

However, it doesn’t mean that the Ovonic is by any means inferior. Compared to the AWANFI (5000 mAh), Ovonic has a higher mAh rating (5200 mAh). This is the second-highest mAh on the list. 

But that’s not all! The Ovonic is also the lightest of the battery packs on the list.

It has a net weight of 375 g or 13.22 ounces. This makes it perfect for racing cars or RC. Having a lower weight would mean that your car has a higher acceleration.

This also means that the battery would cause less stress on the suspension and electrical dashboard of your Arrma Typhon 3.

So overall, the extremely lightweight Ovonic has the least amount of charge drain on the Arrma Typhon and provides excellent durability.

Room For Improvement

The Ovonic 5200 mAh doesn’t support a wide array of cars along with its low discharge rate. If that isn’t your cup of tea then we recommend the AWANFI LiPo 3S.

HRB’s 50C 3S LiPo Battery with EC5 Plug

Next up, is the HRB’s 50C 3S LiPo battery. This particular battery came in third in our list of the best battery for Arrma Typhons 3, officially ending our race for the top 3 best batteries out there.

To be honest, we had a tough time choosing where to put the HRB on the list. But in the end, we concluded its position at the very center of the list. This was partly due to its myriad of attributes.

So why did it come in 3rd on the list? It’ll make more sense if we take a closer look at the HRB’s Spec sheet-

Let’s begin by talking about the battery’s weight. It is the second lightest on the list (376 grams), as it is a shy gram away from being lightest (375 grams). This means that it won’t drain your charge by stressing out your battery.

In simpler terms, this means that it can provide a constant rate of power for a longer time. Just like AWANFI, the HRB is also one of the battery packs that come with two separate batteries.

However, unlike the AWANFI the HRB has a lower cell cycle, of about 150 cycles. Like the Ovonic, it also has a lower discharge rate of 50 C whereas the AWANFI has 60C.

But this doesn’t mean you should write the HRB 50C off just yet. It has a pretty decent battery performance, as it provides you with high bursts of energy.

What’s more interesting is that it is also the fastest charging out of all the batteries on the list. This means you don’t have to wait for hours on end for playing with your Arrma Typhon 3.

However, the HRB 50C is prone to overheating. This basically means you have to keep an eye on it while charging. This is because it cannot be charged at a voltage exceeding 4.2V.

Room For Improvement

The HRB 50C’s main issue is its high maintenance, as it is prone to overheating. If you want a low-maintenance battery you could for the HRB 60C since it doesn’t seem to have overheating issues.

HRB’s 60C 3S LiPo Battery with EC5 Plug

Coming in at 4th on our list is a familiar name. It is the HRB 60C, 11.1V with a mAh rating of 5000. Now, this was a bit hard to place here, given that this battery pack is nearly identical to the 3rd one.

They’re both from the company and as such, they’re both quality batteries. The HRB 60C differs from the HRB 50C in a couple of ways, which is why it came in just below it.

For starters, the discharge rating for the HBR 60C is higher than the HRB 50C. Even though it’s a good thing, other factors gave the HRB 50C an edge.

For starters, this battery pack is a single battery pack, unlike the HRB 50C. Moreover, the HRB 60C is heavier than the HRB 50C. It’s the second heaviest on the list.

This puts this at a very big disadvantage of battery draining. So its higher discharge rating is rendered moot. It is also cumbersome to fit into your Arrma Typhon 3.

However, the HRB 60C does have a wider range of compatibility with different models of cars. 

Room For Improvement

One of the biggest issues regarding the HRB 60C is its bulk. If you want a battery that is much easier to fit in then you should go for the AWANFI 3S LiPo battery.

Ovonic 7600mAh 3S Lipo Battery with EC5 Connector

Last but not least we have another familiar name, the Ovonic 50C 7600mAh battery pack. It’s the last one on the list. However, it did beat several competitors out there to grab the last spot.

So, what makes this one worth it? Let’s find out

For starters, the Ovonic 7600mAh has the highest milliampere rating out of the 5. This means that theoretically, the Ovonic has the longest battery run time on the list.

However, it is also the heaviest of the 5, which is a huge disadvantage. A bigger weight means that there is more stress on the battery and it drains too fast. This is a genuine problem, especially in the long run.

However, it is not all that bad, as it has the second most number of cell cycles (220 cycles). And it provides a lower resistance, which means it can transfer power to the wheels more easily.

It even has an ISO-rated certification for its safety and is made with premium materials.

Room For Improvement

Ovonic’s greatest bane is its battery drainage. If you want a similar battery with a high voltage and mAh rating minus the battery drainage, choose the Ovonic 5200 mAh instead.

Things To Consider Before Getting A Battery

This section is dedicated to the curious cats out there that want to go the extra distance. The purpose of this section is to arm you with the knowledge to figure out what you actually need.

So without further ado, let’s get to it-

mAh: What Does It Mean?

Let’s talk about one of the most important characteristics of batteries now. Its capacity is commonly expressed in milliamperes (mAh) (milliampere per hour).

It indicates the amount of charge your battery has saved. More charge is stored with a higher mAh rating. As a result, the higher the charge/electrical current it can supply every hour to your RC car, the better.

It’ll be easier for you to understand with a few examples.

In laymen’s terms, a higher mAh battery has a longer run time. If your battery has a capacity of 4000 mAh, it can hold a 4 Amp charge for an hour. Similarly, a battery can hold a 3 Amp load for the same amount of time if it’s rated to be a 3000 mAh battery.

However, the calculation is a bit different for a different number of amperes.

A 4000 mAh battery, on the other hand, can hold a 3 Amp load for more than an hour. This also means that a 3000 mAh battery can hold a 4 Amp load for a little less than an hour.

In conclusion, it’s better to have a higher mAh rating. This is especially true if you’re looking for good battery performance in the long run.

C-Rating: What Does It Mean For You?

There’s a reason why we’re mentioning the C-rating right after the mAh rating. It’s because they are interconnected together, and they determine a battery’s performance.

The discharge rate, also known as the charge rate, is denoted by the letter C. This is a fairly difficult notion to grasp.

The C-rating refers to the amount of input or output a battery can handle. In layman’s terms, it refers to the amount of electricity that would be consumed in an hour. As a result, the C value is multiplied by the mAh value, and 1 hour is divided by that C-value.

The following example will clear things up for you-

Assume you have a 2000 mAh battery with a C-rating of 1. This indicates the battery will provide 2000 mAh of power for 60 minutes. However, the charge supply for a 2-C rating will be 4,000 mAh for 30 minutes.

Voltage In Series: What Does It Entail?

Next up, we have a common terminology that everyone is familiar with, the voltage rating. In case you didn’t pay attention in your 6th-grade science class, a higher voltage means higher power.

But is it just that simple? What does it mean for your Arrma Typhon?

Well, for starters you have to know how your batteries are connected. They are in “series”. This is a fancy way of saying they are connected end-on-end.

A single LiPo battery for your Arrma Typhon has a unit rating of 3.7V. If a battery of 1S has 3.7V, then a 2S battery will have a rating of 7.4V and so on.

So what does this equate to? How does a higher voltage give more power?

A higher voltage means more rotations per minute (rpm) for your motor. A general rule of thumb for the RPM and Voltage equation is that a brushless motor with a 3,500kV rating has an RPM of 3,500 for a 1S battery.

A 2S battery would induce an RPM of 25,900 (3,500 times 7.4V) and a 3S battery would have an RPM of 38,850 (3,500 times 11.1V). 

Frequently Asked Questions

Is my Arrma Typhon 3 waterproof?

Yes, the Arrma Typhon 3’s control unit and entire electronic dashboard are completely waterproof. This means you can take it for a spin in off-road conditions.

What Type Of Batteries Does The Arrma Typhon 3 Support?

The Arrma Typhon 3 typically supports a 6 to 8 celled NiMH battery. Or as a substitute, it can use a 2S or 3S Hardcase LiPo battery.

What Type Of Motor Does My Arrma Typhon 3 have?

Arrma Typhon 3 boasts a typical brushless motor, which is extremely durable and weather resistant. It also has a ton of power, which makes it an excellent choice for outdoor applications.

To Sum Up

Well, that was all from us. This was all we could find out about the best battery for Arrma Typhons 3. Hopefully, by now you’ve chosen the battery for your Arrma Typhon.

If not, we recommend that you choose the top pick from our list. After all, it was backed up by hours and hours of research.

Till then, take care and stay safe!