Mavic Mini RC Not Connected: Get The Solutions Here

If you are a Mavic drone user, the RC is an essential thing for you. And RCs can be quite sensitive. Because it may have connection issues at times. And this is one of the nightmares for drone lovers!

So, why is my Mavic mini RC not connected to my phone?

Mavic mini RC not connecting to the phone is not an uncommon issue. This primarily happens if you don’t have proper knowledge about how to connect it. You may also find it difficult to connect if you don’t have the right app for this. Finally, any mechanical issues would also disrupt the connection. 

This is the general information that you needed. But you actually need to go through more information that we have here!

So, get started now!

Why Is My Mavic Mini RC Not Connected?

Mavic mini rc not connected to mobile is not a major issue but rather a common one. You may have misdone something which is the source of this problem.

You must know about the actions so that you never repeat them. We have described the reasons in detail here about Mavic mini RC not connected to mobile.

Reason 1: Improper Activation

If you’re new to the game, you’re probably unsure of how to activate it. And this is a common reason why Mavic mini RC signal lost at times. Although you might be informed, it is common to face minor issues.

To begin, you may encounter problems with the transmitter and receiver

So it’s important to go through the resources thoroughly. Second, it can occur due to a lack of activation information. The activation process is something that many people are unfamiliar with. As a result, such problems are common

Reason 2: Not Installing The Right App

Not all the applications are right for the Mavic RC. Mavic mini problems are common because of this,

So, it is likely that you would fall into this trap and install the wrong one. And it’d be problematic for the Mavic mini RC controller too.

In order to run your drone smoothly, you must install the ideal one. Or else, you would definitely have a problem connecting your drone.

Reason 3: Issues in Mechanics

If none of the above-mentioned causes are present, there could be a mechanical issue. And this can be leading to the mavic mini losing rc signal.

As you can see, RC not getting the connection with the smartphone might also be caused due to internal issues. This leads to mavic mini signal interference.

This activation process can be disrupted by any technical internal difficulties. This is a typical occurrence in Spektrum DX9. 

If you have a mechanical problem, you should seek professional help. Because you might not be able to come up with a viable solution.

So, these are the probable reasons for your Mavic mini RC not being connected. Now, move on to the next part to know about connecting it properly.

How to Connect Mavic Mini RC?

Connecting Manic mini RC is not as hard as you might think. Just follow the steps we have got here and you’re good to go. Take a look now.

Step 1: Charge Your RC

When you buy your drone, you first need to charge the RC properly. You also need to charge the drone before you fly it. This can improve the improve mavic mini signal.

You can know about the duration of the charge in the packaging details. Your Mavic mini RC beeping would be notified when it’s done with charging.

But if your charger has got issues, then replace it. If not sure about the replacement, consider our pickups.

These are the best chargers out there when it comes to Mavic RC! We hope you find them helpful!

Step 2: Get The Right App

Now, install the right app for your RC. You may take ideas from the company about this. After you activate it, turn on your drone

Now, connect your RC and customize the settings as required. And you’re finally done connecting your Mavic mini RC!

Remember that, you need to follow these steps in case your dji mavic mini not connecting.

So, these are the steps to connect Mavic mini RC. Hope these steps are clear to you!


Is there any way to fly the drone without an RC cable?

Yes, you can fly your drone without an RC cable. You can fly it without even connecting to a mobile phone device. However, you would face a few drawbacks to this. You would not be able to get the intelligent flight modes.

Can I reset the Mavic remote myself?

Yes, you can easily reset your Mavic remote yourself. To begin, turn on your controller. Hold C1, C2, and shutter until you hear a beeping noise. It would take around 3 or 4 seconds at max. Then turn the controller and restart it.

Can I sync the controller of my drone myself?

Yes, you can do it yourself without a hassle. First, open the app that you are using for your drone. Go to settings and press the function option. After a few seconds, you would notice the drone beeping. And this indicates that the sync is successful.

Why does my drone get disconnected suddenly?

This can happen due to the cable connection from the RC device. So, inspect the cable if it is loose or anything. If you don’t find it loose then it could be the internal issues with the cable. Change the cable and see if it works or talk to an expert.

Why does the drone move irregularly?

This problem is not in any way connected to your RC. But this happens due to mechanical issues with your drone. The throttle or propeller might be the reason for this issue. So, you must not delay resolving this issue by a mechanic. 

The Final Words

That’s all about Mavic mini RC not connected and its guide from us! We believe the information enriched your knowledge and help resolve your concern.

But don’t leave yet. Take a bonus tip before you sign off. Don’t take any risk trying to resolve an issue if it’s technical or hard for you to deal with. 

All the best!